Skip to Content

Welcome!

This community is for professionals and enthusiasts of our products and services.
Share and discuss the best content and new marketing ideas, build your professional profile and become a better marketer together.

You need to be registered to interact with the community.
This question has been flagged
1 Reply
37 Views

Hello, I just starting working with our new drone soccer kits. I had 4 built and working correctly until one started having a motor issue.  The mounting screws are not anywhere near the motor so I know that's not it.

What I have done so far: I swapped out the motor and the new motor does the same thing. Which tells me its software not hardware (I think) 

taken the props off and connected it to BetaFlight. Tested the motors and motor #2 only spins slightly for a few seconds then the motor beeps and stops spinning. 

I then flashed the drone again with the latest version (same as before) and this seemed to fix the motor/power issue. 

I put the props back on and went to test the drone. The motor #2 started to spin slower and eventually beeped and stopped. 

Avatar
Discard
Best Answer

Based on the symptoms described, it seems likely that the motor has an intermittent connection, indicated by the beeping sound. This beeping is typically a sign that the ESC has rebooted, possibly due to a connection issue. To resolve this, I recommend contacting customer service for assistance in replacing the AIO (All-In-One) board.

Avatar
Discard